Stained Glass Butterfly 101 - How to Make a Stained Glass Butterfly

​Stained Glass Butterfly 101 - How to Make a Stained Glass Butterfly
By [http://EzineArticles.com/expert/Machelle_Firth/698320]Machelle Firth 

Stained glass ornaments, like a stained glass butterfly, add an exceptional and lively component to your house.

Making your own stained glass butterfly, is simpler than you may think. Here are several ideas to aid you start with this invigorating hobby.

Focus on Design

To start with, think about your design- be bold with your use of color, but don't get excessively complex with the pieces which will make up your butterfly.

Aim to ensure a balance of color. If you're stuck for a design, there're a lot of internet resources with a number of inspiring styles.

Be Smooth With Your Cuts

If this is your very first piece, it's beneficial to use smooth faced glass, instead of textured glass, as it's simpler to cut. A paper pattern will be helpful for lying on your glass, and tracing the lines to be cut.

Keep in mind that you'll require to leave room around your pieces for the lead came; pattern-cutting scissors might aid ensure this when cutting your design components out.

You first score over your traced lines, using your pencil cutter. It is important that the glass is lubricated with cutter oil.

Running pliers are then used to apply pressure to the score line- at the glass piece should snap cleanly. When it comes to glass cutting, it is helpful to heat the glass, as this aids the break.

Putting It Altogether

You're now prepared to put together your pieces jointly using lead came. This should be 'stretched' first, by using lead pullers.

Then take an edge glass piece, and press a zinc came to the outer edge (this strengthens the finished piece). You can now measure and cut the proper lengths of H section lead came to the internal joins- where one glass piece abuts another.

You might have to coax the pieces into place with a glazing hammer.

Last Steps

Ultimately you solder the places where the lead came lines meet, and when cooled, cement the joints.

After some final cleaning, using whiting, you can leave to dry- this can take a couple of days. Once dried, your beautiful stained glass butterfly will be ready for hanging.

Learn more about how stained glass butterfly [http://stained-glass-kits.com/stained-glass-butterfly/how-to-make-a-stained-glass-butterfly/] can help you tap into your hidden creativity. Stop by [http://stained-glass-kits.com/] to find out how to get the best deals on what you need for this fulfilling hobby.

Article Source: [http://EzineArticles.com/?Stained-Glass-Butterfly-101---How-to-Make-a-Stained-Glass-Butterfly&id=5739295] Stained Glass Butterfly 101 - How to Make a Stained Glass Butterfly